This can lead to compatibility issues with certain monitors and even SCART to HDMI upscalers. The Euro A/V Cable can also carry 480p and 1080i signals, but to do so it switches off RGBs (RGB Sync) signals and switches to RGsB (RGB sync on green). It provides a clearer picture than either S-Video or composite signals. The EURO A/V Cable (SCPH-10142) is a SCART cable capable of carrying 576i/50 Hz or 480i/60 Hz using the RGB standard, as well as standard stereo audio and composite video. The AV Adaptor with S Video Out Connector (SCPH-10130) is a break-out box which provides an additional AV-Multi out port, as well as composite, S-Video and stereo audio connectors to allow connection to an A/V receiver or similar device. The S-Video cable (SCPH-10060U/97030) carries dual-channel (stereo) audio and S-Video at 576i/50 Hz (PAL) or 480i/60 Hz (NTSC), which provides a clearer picture than the standard A/V (composite) cable. This is merely an adapter and provides no quality improvement over a direct composite connection. Consoles in PAL territories also come bundled with a composite/stereo SCART adapter block to facilitate connection to SCART enabled TVs. It is identical to the composite cables available for the PlayStation and PlayStation 3. The AV cable (SCPH-10500) is included with the PS2 and carries dual-channel (stereo) audio and composite video at 576i/50 Hz (PAL) or 480i/60 Hz (NTSC). It is similar to the RFU adapter cable available for the PlayStation. The RFU Adapter (SCPH-1122) is an RF Modulator and cable that carries mono audio and video at 576i/50 Hz (PAL) or 480i/60 Hz (NTSC) via an RF signal and connects using a TV aerial plug. The PS2 is compatible with all PlayStation and PlayStation 3 cables which use the AV-multi port. Additionally, the PS2 features a TOSLINK port, which facilitates the output of digital S/PDIF audio - 2-channel LPCM, 5.1-channel Dolby Digital and 5.1-channel DTS (the latter two are only available during DVD playback when it is encoded on the disk). Various A/V cables have been made available for the PlayStation 2, offering varying levels of picture quality. It communicates with the console using a proprietary 2.4 GHz RF protocol wireless by way of a dongle which connects to the PS2's controller port in a similar manner to Nintendo's WaveBird wireless controller. As a power saving measure, the vibration may be turned on or off by the user by way of a button on the controller's face. The controller also features two vibration motors for haptic feedback, which are compatible with DualShock/DualShock 2 enabled games. As its buttons are pressure-sensitive, the controller is compatible with games which require a DualShock 2. ten analog (pressure-sensitive) buttons (, ,, , L1, R1, L2, R2, Start and Select), three digital buttons (元, R3 and the analog mode button) and two analog sticks. It features all of the inputs found the standard DualShock 2 controller, i.e. The Logitech Cordless Action Controller is an officially licensed wireless controller for the PlayStation 2 made by Logitech. PlayStation (2) controller port, proprietary 2.4 GHz wireless.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |